Multilogger - thermo-hygro-barometer with 2 MiniDIN and 2 Terminals

Battery powered datalogger with built-in atmospheric pressure sensor and 4 universal inputs for measurement of temperature, humidity, 0-10V voltage, 0-20mA current, two-state signal and for counting pulses.
Multilogger can be installed permanently to Ethernet network or work as portable device.
Included is traceable calibration certificate in accordance with EN ISO/IEC17025.

The Multilogger is a battery operated datalogger capable of measuring and recording sensor and electrical values through its inputs.
Datalogger can be connected to Ethernet. Then measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.

code

M1321
Warranty

3 years

Add to quote

Technical data

Measured value

Temperature

Relative humidity

Counted values (dew point…)

Atmospheric pressure

Current

Voltage

Two-state signal

Pulses

TEMPERATURE SENSOR - external probe Pt1000

Measuring range -200 to +600 °C

Accuracy ±0.2 °C (-200 to +100 °C);
±0.2 % from reading from +100 to +600 °C

Resolution 0.1 °C

TEMPERATURE+HUMIDITY SENSOR - external probe T+RH DIGI

Measuring range according to the connected probe Digi/M

Accuracy according to the connected probe Digi/M

Resolution 0.1 °C

DEW POINT

Measuring range according to the connected probe Digi/M

Accuracy according to the connected probe Digi/M

Resolution 0.1 °C

ATMOSPHERIC PRESSURE SENSOR

Measuring range 600 hPa to 1100 hPa

Accuracy ±1,3 hPa at 23 °C

Resolution 0.1 hPa

DC VOLTAGE

Measuring range 0 to 10 V

Accuracy ±10 mV

Resolution better than 100 µV

DC CURRENT

Measuring range 0 to 20 mA

Accuracy ±20 µA

Resolution better than 0,1 µA

BINARY SIGNAL

Input voltage for level “switched on”/ <0,4 V/> 2 V

Minimum/maximum input voltage 0 V/+30 V DC

I mpedance of the “switched on”/ < 10 kOhm/> 300 kOhm

COUNTER INPUT

Range of counter 24 bit (16 777 215) the counter overflow can be allowed

Maximum input frequency 200 Hz

GENERAL TECHNICAL DATA

Operating temperature -10 to +60 °C

Channels internal atmospheric pressure sensor, 2x external temperature probe or connectable temperature+humidity probe,
2x binary, counter, voltage and current input

Counted values dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy

Memory 1 000 000 values (noncyclic record), 600 000 values (cyclic record)

Recording interval 1s to 24 hours

Display and alarm refresh each 10 s

Recording mode noncyclic - data logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new

Available temperature units degrees Celsius, degrees Fahrenheit

Communication interface Ethernet, USB, RS232

Ethernet communication protocols WWW, SNMPv1, XML, DATALINK

Alarm protocols E-Mail

Power AC adapter 230Vac/5Vdc (neccessary for Ethernet interface)

Battery life 3 - 4 weeks

Protection class IP20

Dimensions (without connectors) 178 x 95 x 37mm, without attached cables

Weight (including batteries) approx. 380 g

Warranty 3 years

Features

Up to 4 physical Inputs - 2x TERMINALS + 2x MiniDin

Sensors with woltage output (range 0-10 V; accuracy ±10 mV)
Sensors with current output (range 0-20 mA; accuracy ±20 µA)
Devices with two-state output (potential-less contact or voltage signal 0-30V); may be applied to input 3 and 4
Devices with pulse signal (potential-less contact or voltage signal 0-30V); may be applied to input 4
Temperature probes Pt1000 with built-in configuration memory (serie xxx/M)
Temperature/relative humidity probes with digital output - DigiS/M, DigiL/M, DIGIH/M
The probes are interchangeable without calibration to a specific device and regardless of the length of the cable. The length of the cable can be 1, 2, 5, 10, 15 meters.
Internal barometric pressure sensor (range 600 - 1100 hPa; accuracy ±1.3 hPa at 23°C)

Evaluation of up to 16 variables

Up to 16 variables may be calculated from the four connected probes / sensors. This is the sum of the measured and calculated values. The calculated values can be a further expression of moisture – dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy. It can be also the result of inter-channel conversions, e.g. the difference of two connected temperature probes.

The measured values are stored in the internal non-volatile memory. Memory capacity is up to 1 million values. Logging mode can be adjusted as non-cyclic, when logging stops after filling the memory, or cyclic, when after fulfilling the memory oldest stored values are overwritten by new ones.

Measured values are displayed on the screen with backlight option and the ability to change the size of display digits

Power supply

Multilogger can be powered by AC adapter or by rechargeable batteries with charging capability. Batteries are always a part of the device (you can also use standard alkaline AA batteries). Batteries power the device for several months.

While using the AC adapter, the batteries provide backup operations and provide recording and measurement during power failure. Thanks to the Ethernet output the device informs about the failure via e-mail message.

Alarm limits and alarm indication

It is possible to set two independent alarm limits for each channel (i.e. measured or calculated value).

Alarm signalization can be acoustic (built-in beeper), optical, sending an e-mail alert or an alarm output. The alarm output is for connecting an external audio or visual alarm.

Communication interfaces

Multilogger is always equipped with USB connector for communication, data analysis and also for charging of the rechargeable batteries.

send an e-mail when an alarm state starts or ends
use DATALINK: display current values or download values from memory to COMET Database in your PC. Software COMET Database contains many useful tools for data analysis - graphs, tables, statistics, etc.
simple wireless communication with Wi-Fi TP-LINK router
third-party applications to read the actual measured values using universal protocols SNMPv1 and XML
view current measured values using your web browser

Output ALARM OUT

Multilogger - Alarm limits and alarm indication

Output can be used for controling other devices when alarm is launched, such as external buzzer, telephone dialer etc.
Type of output - open collector transistor
Max. switching current - 100 mA
Max. voltage on output - 24 V
Auxiliary voltage at terminal - +5 V (only when the mains supply is present)
Users can receive alarms if the values go outside the paramters set. Alarms are indicated through an internal buzzer , 3 LEDs or email alerts via Ethernet port.

Optional accessories and download

Temperature probe Pt1000TG8/M, MiniDin connector

Temperature range: -80 to 200°C

code SN104M

Temperature probe Pt1000TG8/M, MiniDin connector, cable 2 meters

Temperature range: -80 to 200°C

code SN105M

Temperature probe Pt1000TG8/M, MiniDin connector, cable 5 meters

Temperature range: -80 to 200°C

code SN108M

Temperature probe Pt1000TG8/M, MiniDin connector, cable 10 meters

Temperature range: -80 to 200°C

code SN113M

Temperature probe Pt1000TG7/M, MiniDin connector

Temperature range: -50 to 200°C

code SN164M

Temperature probe Pt1000TG7/M, MiniDin connector, cable 2 meters

Temperature range: -50 to 200°C

code SN165M

Temperature probe Pt1000TG7/M, MiniDin connector, cable 5 meters

Temperature range: -50 to 200°C

code SN166M

Temperature probe Pt1000TG7/M, MiniDin connector, cable 10 meters

Temperature range: -50 to 200°C

code SN167M

Temperature probe 2304-220/M, MiniDin connector, cable 1 meter

Temperature range: -30 to 220°C

code SN168M

Temperature probe 2021-150/M, MiniDin connector, cable 1 meter

Temperature range: -30 to 150°C

code SN169M

Temperature probe 2034-220/M, MiniDin connector, cable 1 meter

Temperature range: -30 to 150°C

code SN175M

Temperature probe 2061-200/M, MiniDin connector, cable 1 meter

Temperature range: -50 to 200°C

code SN178M

Temperature probe 2061-200/M, MiniDin connector, cable 2 meters

Temperature range: -50 to 200°C

code SN179M

Temperature probe 2061-200/M, MiniDin connector, cable 5 meters

Temperature range: -50 to 200°C

code SN180M

Temperature probe 2061-200/M, MiniDin connector, cable 10 meters

Temperature range: -50 to 200°C

code SN181M

Temperature probe PTS350A-5/M, MiniDin connector, cable 5 meters

Temperature range: -30 to 130°C

code SN182M

Temperature probe PTS350A-10/M, MiniDin connector, cable 10 meters

Temperature range: -30 to 130°C

code SN183M

Temperature probe Pt1000TGL40/M, MiniDin connector, cable 1 meter

Temperature range: -30 to 80°C

code SN185M

Temperature probe Pt1000TGL40/M, MiniDin connector, cable 2 meters

Temperature range: -30 to 80°C

code SN186M

Temperature probe Pt1000TGL40/M, MiniDin connector, cable 5 meters

Temperature range: -30 to 80°C

code SN187M

Temperature probe Pt1000TGL40/M, MiniDin connector, cable 10 meters

Temperature range: -30 to 80°C

code SN188M

Temperature probe Pt1000TR160/M, MiniDin connector, cable 1 meter

Temperature range: -30 to 80°C

code SN199M

Temperature probe Pt1000TR160/M, MiniDin connector, cable 2 meters

Temperature range: -30 to 80°C

code SN200M

Temperature probe Pt1000TR160/M, MiniDin connector, cable 5 meters

Temperature range: -30 to 80°C

code SN201M

Temperature probe Pt1000TR160/M, MiniDin connector, cable 10 meters

Temperature range: -30 to 80°C

code SN202M

Temperature probe Pt1000TR160/M, MiniDin connector, cable 15 meters

Temperature range: -30 to 80°C

code SN203M

Stick-in probe 2091-250/M, MiniDin connector, cable 1 meter

Temperature range: -30 to 200°C

code SN210M

Stick-in probe 2091-250/M, MiniDin connector, cable 2 meters

Temperature range: -50 to 250°C

code SN211M

Stick-in probe 2091-250/M, MiniDin connector, cable 5 meters

Temperature range: -50 to 250°C

code SN212M

Stick-in probe 2091-250/M, MiniDin connector, cable 10 meters

Temperature range: -50 to 250°C

code SN213M

Temperature probe Pt1000TG68/M, MiniDin connector, cable 2 meters

Temperature range: -50 to 200°C

code SN232M

Temperature probe Pt1000TG68/M, MiniDin connector, cable 5 meters

Temperature range: -50 to 200°C

code SN233M

Temperature probe Pt1000TG68/M, MiniDin connector, cable 10 meters

Temperature range: -50 to 200°C

code SN234M

Temperature probe Pt1000TR125/M, MiniDin connector, cable 1 meter

Temperature range: -190 to 150°C

code SN239M

Temperature probe Pt1000TR125/M, MiniDin connector, cable 2 meters

Temperature range: -190 to 150°C

code SN240M

Temperature probe Pt1000TR125/M, MiniDin connector, cable 5 meters

Temperature range: -190 to 150°C

code SN241M

Temperature probe Pt1000TR125/M, MiniDin connector, cable 10 meters

Temperature range: -190 to 150°C

code SN242M

Ambient temperature probe with Pt1000 sensor, 200-80/M

Temperature range: -30 to 80°C

code SN243M

Temperature probe Pt1000TR050S/M, MiniDin connector, cable 1 meter

Temperature range: -50 to 400°C

Discontinued

Temperature probe Pt1000TR050S/M, MiniDin connector, cable 2 meters

Temperature range: -50 to 400°C

Discontinued

Temperature probe Pt1000TR050S/M, MiniDin connector, cable 5 meters

Temperature range: -50 to 400°C

Discontinued

Ultra thin temperature probe Pt1000TG3/M, MiniDin connector

Temperature range: -50 to 200°C

code SN252M

Ultra thin temperature probe Pt1000TG3/M, MiniDin connector, cable 2 meters

Temperature range: -50 to 200°C

code SN254M

Ultra thin temperature probe Pt1000TG3/M, MiniDin connector, cable 5 meters

Temperature range: -50 to 200°C

code SN255M

Ultra thin temperature probe Pt1000TG3/M, MiniDin connector, cable 10 meters

Temperature range: -50 to 200°C

code SN256M

Temperature probe Pt1000TR050S/M, MiniDin connector, cable 10 meters

Temperature range: -50 to 400°C

Discontinued

Temperature probe Pt1000TG8Ex/M, MiniDin connector, for ATEX zone II

Temperature range: -30 to 180°C

code SN263M

Temperature probe Pt1000TG8Ex/M, MiniDin connector, for ATEX zone II, cable 2 meters

Temperature range: -30 to 180°C

code SN264M

Temperature probe Pt1000TG8Ex/M, MiniDin connector, for ATEX zone II, cable 5 meters

Temperature range: -30 to 180°C

code SN265M

Temperature probe Pt1000TG8Ex/M, MiniDin connector, for ATEX zone II, cable 10 meters

Temperature range: -30 to 180°C

code SN266M

Temperature probe Pt1000TG8Ex/M, MiniDin connector, for ATEX zone II, cable 15 meters

Temperature range: -30 to 180°C

code SN267M

Temperature probe Pt1000TR050M/M, MiniDin connector, cable 1 meter

Temperature range: -50 to 400°C

code SN270M

Temperature probe Pt1000TR050M/M, MiniDin connector, cable 2 meters

Temperature range: -50 to 400°C

code SN271M

Temperature probe Pt1000TR050M/M, MiniDin connector, cable 5 meters

Temperature range: -50 to 400°C

code SN272M

Temperature probe Pt1000TR050M/M, MiniDin connector, cable 10 meters

Temperature range: -50 to 400°C

code SN273M

Ultra thin digital temperature/humidity probe

Temperature range: -10 to 60°C

code DIGIH/M-1

Ultra thin digital temperature/humidity probe, cable 2 m

Temperature range: -10 to 60°C

code DIGIH/M-2

Ultra thin digital temperature/humidity probe, cable 5 m

Temperature range: -10 to 60°C

code DIGIH/M-5

Digital temperature/humidity probe DIGIL/M, MiniDin connector

Temperature range: -10 to 60°C

code DIGIL/M

Digital temperature/humidity probe DIGIL/M-1, MiniDin connector, cable 1 meter

Temperature range: -30 to 105°C

code DIGIL/M-1

Digital temperature/humidity probe DIGIL/M-10, MiniDin connector, cable 10 meters

Temperature range: -30 to 105°C

code DIGIL/M-10

Digital temperature/humidity probe DIGIL/M-15, MiniDin connector, cable 15 meters

Temperature range: -3 to 105°C

code DIGIL/M-15

Digital temperature/humidity probe DIGIL/M-2, MiniDin connector, cable 2 meters

Temperature range: -30 to 105°C

code DIGIL/M-2

Digital temperature/humidity probe DIGIL/M-5, MiniDin connector, cable 5 meters

Temperature range: -30 to 105°C

code DIGIL/M-5

Digital temperature/humidity probe DIGIS/M, MiniDin connector

Temperature range: -10 to 60°C

code DIGIS/M

Digital temperature/humidity probe DIGIS/M-1, MiniDin connector, cable 1 meter

Temperature range: -10 to 60°C

code DIGIS/M-1

Digital temperature/humidity probe DIGIS/M-10, MiniDin connector, cable 10 meters

Temperature range: -10 to 60°C

code DIGIS/M-10

Digital temperature/humidity probe DIGIS/M-15, MiniDin connector, cable 15 meters

Temperature range: -10 to 60°C

code DIGIS/M-15

Digital temperature/humidity probe DIGIS/M-2, MiniDin connector, cable 2 meters

Temperature range: -10 to 60°C

code DIGIS/M-2

Digital temperature/humidity probe DIGIS/M-5, MiniDin connector, cable 5 meters

Temperature range: -10 to 60°C

code DIGIS/M-5

AC/DC adapter 230Vac to 5Vdc/2.1A, EU

code A1825eu

AC/DC adapter 230Vac to 5Vdc/2.1A, UK

code A1825uk

AC/DC adapter 230Vac to 5Vdc/2.1A, US

code A1825us

Accredited temperature calibration

code SLU001

Accredited temperature and relative humidity calibration

code SLU003

Accredited atmospheric pressure calibration

code SLU006

300Mbps Wireless N Nano Router

code TL-WIFI

Wall holder for the Multilogger

code MLP002

Holder for mounting the Multilogger on magnetic surfaces

code MLP003

Wall holder for external probes DIGIL

code SP009

COMET Database

code CDB

COMET VISION - Analytical Software for Dataloggers and Multiloggers

code CV

Database Viewer for Comet Database

code DBV

Magnetic door contact SA-200-A

code SA200A

Magnetic door contact with cable length 10m

code SA200A-10

Magnetic door contact with cable length 15m

code SA200A-15

Magnetic door contact with cable length 2m

code SA200A-2

Magnetic door contact with cable length 20m

code SA200A-20

Magnetic door contact with cable length 30m

code SA200A-30

Magnetic door contact with cable length 5m

code SA200A-5

Adapter for easy connection U/I signals to Multilogger

code MLP006

External audio unit for MSxx and Multilogger

code MP026

COMET presentation case for samples

code BM512

COMET Magnetic Foldable Stand

code PPO001

Related products

COMETEO Professional Multi-Plate Radiation Shield for Weather Sensors

Discontinued

COMETEO Professional Radiation Shield for Weather Sensors, actively ventilated with built-in fan

Discontinued

Ethernet Multilogger - thermo hygro meter with 4 MiniDIN inputs

code M1140

Multilogger - Thermometer with 4 Thermocouple inputs and Ethernet port

code M1200

Multilogger - thermo hygro meter with 2 MiniDIN and 2 Thermocouple inputs

code M1220

Multilogger - universal 4 channel thermometer hygrometer with 2 MiniDIN and 2 Terminals

code M1320

Ethernet Multilogger - thermo-hygro-CO2 meter with 2 MiniDIN and 2 Terminals

code M1322

Multilogger - thermo-hygro-CO2-barometer with 2 MiniDIN and 2 Terminals

code M1323

Ethernet Multilogger - universal datalogger with 4 inputs

code M1300

Multilogger - thermo-hygro-barometer with 2 MiniDIN and 2 Terminals

Technical data

Measured value

TEMPERATURE SENSOR - external probe Pt1000

TEMPERATURE+HUMIDITY SENSOR - external probe T+RH DIGI

DEW POINT

ATMOSPHERIC PRESSURE SENSOR

DC CURRENT

BINARY SIGNAL

COUNTER INPUT

GENERAL TECHNICAL DATA

Features

Up to 4 physical Inputs - 2x TERMINALS + 2x MiniDin

Evaluation of up to 16 variables

Power supply

Alarm limits and alarm indication

Communication interfaces

Output ALARM OUT

Optional accessories and download

Software

Others

Manuals

Catalogs

Related products

Reference

Restoring the original tempering hot-air heating system, Chateau Lednice

Measurement of runoff wastewater treatment plant

Cool Room temperature monitoring with MULTILOGGER

Prague Castle

Masaryk University in Brno

Drazice farm

Multilogger Online Demo