Digital temperature/humidity probe DIGIL/M, MiniDin connector
Digital probe with connector MiniDIN, direct insertion.
Stainless steel mesh filter.
The probe is supplied with a calibration certificate.
The probe is interchangeable without calibration to a specific device and regardless of the length of the cable.
Optionally also available with cable of various lengths. For other cable lengths use the selector.
-
codeDIGIL/M
Product variants
Technical data
Measured value
Temperature
Relative humidity
TEMPERATURE SENSOR
Measuring range
-10 to +60 °C
Accuracy
±0.4 °C
Response time
t90 < 15 min, temperature step 20 °C, air flow 1 m/s
HUMIDITY SENSOR
Measuring range
0 to 100 % RV
Accuracy
±1.8 %RV in the range of 0 to 90 % RH at 23 °C
Response time
t90 < 9 s (humidity step 60 %RH, constant temperature)
Hysteresis
±1 % RV
Linearity
±1 % RV
DEW POINT
Measuring range
-60 to +60 °C
Accuracy
see the manual
GENERAL TECHNICAL DATA
Operating temperature
-10 to +60 °C
Protection class
IP40
Connector
MiniDin
Dimensions (without cable)
54 x 18 mm
Weight
cca 10 g
Warranty
3 years