Power over Ethernet Web Sensor

14-05-2013

Smart PoE sensors are used to measure temperature, barometric pressure, humidity, dew point temperature, absolute humidity, specific humidity, mixing ratio or specific enthalpy.

Warning email are sent when measured value exceed selected limits. Emails are also send when values returns back into safe range. SMTP authentication is supported. Emails with CSV file attachment can be sent at selected intervals.

Intelligent online Power over Ethernet sensor is designed for measurement of temperature, atmospheric pressure, relative humidity, dew point temperature, absolute humidity, specific humidity, mixing ratio or specific enthalpy. Our online web sensor allows for powerful notifications via Email, SOAP, SNMP and Syslog.

Actual measured values are accessible via powerful embedded web server. Web pages are ready for access from mobile devices like smartphones and tablets. Web Sensor configuration via web pages is possible too. The device allows to user customize the design of web pages.

- industrial temperature humidity pressure transmitters
- building HVAC management / automation
- air-conditioned rooms
- warehouses
- glasshouses
- museums, archives, galleries
- industrial Ethernet
- data centres, server rooms

P-line Web Sensors P86xx without LCD
Temperature - built-in temperature sensor - P8610
Temperature + Relative Humidity depending on connected probe - P8631

T-line Web Sensors Tx6xx with LCD
Temperature - T0610, T4611
Temperature + Relative Humidity - T3610, T3611
Temperature + Relative Humidity + Atmospheric Pressure - T7610, T7611